Toshiba portege m400 Manual De Usuario

4-48

User’s Manual

Operating Basics

1. Turn off the power to the computer and to all external devices 

connected to the computer.

2. Plug one end of the cable into the LAN jack. Press gently until you hear 

the latch click into place.

3. Plug the other end of the cable into a LAN hub connector. Check with 

your LAN administrator before connecting to a hub. 

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.

1. Pinch the lever on the connector in the computer’s LAN jack and pull 

out the connector.

2. Disconnect the cable from the LAN hub in the same manner. Check 

with your LAN administrator before disconnecting from the hub.

Cleaning the computer

To help ensure long, trouble-free operation, keep the computer free of dust 
and use care with liquids around the computer.

■

Be careful not to spill liquids into the computer. If the computer does get 
wet, turn the power off immediately and let the computer dry completely 
before you turn it on again.

■

Clean the computer using a slightly damp (with water) cloth. You can 
use glass cleaner on the LCD display screen. Spray a small amount of 
cleaner on a soft, clean cloth and wipe the screen gently with the cloth.

LAN jack

LAN connector

When the computer is exchanging data with the LAN, the LAN Active 
indicator glows orange. When the computer is connected to a LAN hub but 
is not exchanging data, the Link indicator glows green.

Make sure the LAN Active indicator (orange LED) is out before you 
disconnect the computer from the LAN.