Toshiba portege m400 Manual De Usuario
2-14
User’s Manual
The Grand Tour
USB floppy disk drive
The USB floppy disk drive accommodates 1.44-megabyte or 720-kilobyte
floppy disks and connects to the USB port. It is supplied as standard with
some models and as an option with others.
floppy disks and connects to the USB port. It is supplied as standard with
some models and as an option with others.
Figure 2-10 USB floppy disk drive
USB connector
Insert this connector into one of the USB ports of
your computer.
your computer.
Disk-In-Use Indicator
This indicator lights when the floppy disk is being
accessed.
accessed.
Floppy disk slot
Insert a floppy disk in this slot.
Eject button
When a floppy disk is fully seated in the drive, the
eject button pops out. To remove a floppy disk,
push in the eject button and the floppy disk pops
out partially for removal.
eject button pops out. To remove a floppy disk,
push in the eject button and the floppy disk pops
out partially for removal.
Eject button
Floppy disk
slot
slot
Disk-In-Use
Indicator
Indicator
USB connector
Check the Disk-In-Use indicator when you use the USB floppy disk drive.
Do not press the eject button or turn off the computer while the light is
glowing. Doing so could destroy data and damage the floppy disk or the
drive.
Do not press the eject button or turn off the computer while the light is
glowing. Doing so could destroy data and damage the floppy disk or the
drive.
■
The USB floppy disk drive should be placed on a flat, horizontal surface
when in use. Do not set the drive on an incline greater than 20
when in use. Do not set the drive on an incline greater than 20
o
while it
is operating.
■
Do not set anything on top of the floppy disk drive.