Toshiba portйgй m700 series, m705 series Manual De Usuario

180

Always save your data even when you are using Standby. If your 
battery fully discharges, information that has not been saved will be 
lost. Your computer can be configured to warn you when the battery 
is running low see 

. 

If you are running on battery power, it is recommended that you do 
not leave the computer in Standby mode for long periods of time.

To charge the battery, leave the computer plugged into a live wall 
outlet for several hours. For more information see 

. 

Non-System disk 

 disk error

Make sure there is no diskette in the optional external diskette 
drive. If there is a diskette in the drive, remove it and press any key 
to continue. If pressing any key does not work, press 

Ctrl,

 

Alt

, and 

Del 

to 

restart the computer. For more information see 

If the AC power light is blinking, try the following steps:

Cut off power to the computer by disconnecting the AC adaptor 
and removing the battery. The error condition will be 
interrupted, and the AC power light will stop flashing.

Put the battery back into the computer. Do not connect the AC 
adaptor. Try turning the computer on again. 

If the computer starts normally, the AC adaptor may be 
defective and will need to be replaced (see the Toshiba Web 
site at 

If the AC power light starts flashing, remove the battery, and 
continue with the steps below.

Connect the AC adaptor to the computer. Leave the battery out 
of the computer. Try turning the computer on again. 

If the computer starts normally, the battery may need charging, 
may be depleted, or may be defective. Turn the computer on, 
insert the battery, and then leave the computer running for 
several hours, which will deliver a slow, steady “trickle-
charge” to the battery. Once the battery has been trickle-
charged, it may begin working correctly again.