Toshiba portйgй m700 series, m705 series Manual De Usuario

237

5.375 x 8.375 ver 2.3

Because the wireless LAN’s default connection setting is for Ad Hoc 
mode, the Toshiba Wireless Projector will not connect if the projector 
is set to Infrastructure mode. If this occurs, you can change the 
wireless LAN’s connection setting to Infrastructure mode to match 
the settings on the projector.

If the wireless mode for the wireless setting is set for 5 GHz 
(802.11a), Quick Connect changes this mode to 2.4 GHz (802.11b) 
and then connects to the projector.

The wireless LAN configuration returns to the settings that were 
last used before the Quick Connect function was started:

❖

If the Toshiba Wireless Projector utility is closed. 

❖

If you select Toshiba Wireless Projector (DPJ) from the 
ConfigFree tray menu (this disconnects the wireless LAN 
connection). 

❖

If you select a profile from the ConfigFree tray menu or when 
you disable a wireless device. 

❖

If you close ConfigFree.

When Access Point is not available, use the Direct Link Toshiba 
Device feature to connect your computer in Ad Hoc (peer-to-peer) 
mode and use the Summit feature.

NOTE