Toshiba satallite pro 6000 series c6602-1001m1 Manual De Usuario
177
Expansion Options
Using an external monitor
Directing the display output when you turn on the computer
Once you’ve connected an external display device, you can choose
to use the built-in display panel only, the external device only, or
both simultaneously. The quickest way to change the display
output settings is to use the display hot key (
to use the built-in display panel only, the external device only, or
both simultaneously. The quickest way to change the display
output settings is to use the display hot key (
Fn
+
F5
):
1
Press
Fn
and
F5
simultaneously.
2
While holding down
Fn
, press
F5
repeatedly until the setting
you want takes effect.
This hot key cycles through the settings in order:
❖
Built-in display only
❖
Built-in display and external monitor simultaneously
❖
External monitor only
❖
Built-in display and TV (or other external video device)
simultaneously (only when in dual controller mode)
simultaneously (only when in dual controller mode)
❖
TV (or other external video device) only
3
Release the
Fn
key.
TECHNICAL NOTE: You can also change these settings
using the Display Properties Box.
using the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel and clicking Display. Choose the Settings tab,
click the Advanced button, select Display Device, select the
applicable Monitor type, click Apply or OK.
Control Panel and clicking Display. Choose the Settings tab,
click the Advanced button, select Display Device, select the
applicable Monitor type, click Apply or OK.
For more information on switching the display output, see
.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
video display device), you may need to adjust the video settings.