Toshiba satellite a200 Manuales De Servicio

Satellite A200/A205/Pro A200 Series Maintenance Manual            

[CONFIDENTIAL]

         

18

To determine if the computer’s keyboard is functioning properly, perform the following 
procedures. Figure 2-5 outlines the process. Start with Procedure 1 and continue with the 
other procedures as instructed. 

Procedure 1:  External keyboard check 

Procedure 2:  Diagnostic check 

Procedure 3:  Connector and replacement check 

Connect a USB keyboard to one of the computer’s USB ports, and then boot the computer. 
The computer automatically detects the external keyboard. 

If the external keyboard works correctly, the internal keyboard or its connections may be 
faulty.  Go to Procedure 2. 

If the external keyboard appears to have the same problem as the internal keyboard, the 
system board may be damaged.  Replace it with a new one following the instructions in 
Chapter 4. 

Run the Diagnostic Program, which will automatically execute the Keyboard Test.  Refer to 
Chapter 3, Tests and Diagnostics for more information on how to run the program. 

If an error is located, go to Procedure 3.  If an error does not occur, the keyboard is 
functioning properly. 

The keyboard and/or system board may be disconnected or damaged.  Disassemble the 
computer following the steps described in Chapter 4, Replacement Procedures and perform 
the following checks. 

Check 1 

Make sure the keyboard cable is firmly connected to the system board.  

If the connection is loose, reconnect firmly and repeat Procedure 2. If there is still 
an error, go to Check 2. 

Check 2 

The keyboard may be damaged. Replace it with a new one following the 
instructions in Chapter 4. 

If the problem still exists, perform Check 3. 

Check 3 

The system board may be damaged.  Replace it with a new one following the 
instructions in Chapter 4.