Toshiba satellite m110 Manual De Usuario

49

5.375 x 8.375 ver 2.3

If the AC power light flashes amber during charging, 
either the main battery is malfunctioning, or it is not 
receiving correct input from the AC power supply.

Disconnect the AC power cord/cable and remove the 
main battery pack. See 

 for information on replacing the main battery.

Your computer came with its battery already installed. Before 
using the battery to power the computer, you must charge the 
battery.

To charge the battery, leave the computer plugged into an AC 
power source with the computer turned off until the battery 
light glows blue. After that, the battery will be completely 
charged and ready to power the computer.

Once the battery is charged for the first time, avoid leaving the 
computer plugged in and turned off for more than a few hours 
at a time. Continuing to charge a fully charged battery can 
damage the battery.

TECHNICAL NOTE: The recharging of the battery cannot occur 
when your computer is using all of the power provided by the 
AC adaptor to run applications, features, and devices. Your 
computer’s Power Saver utility can be used to select a power 
level setting that reduces the power required for system 
operation and will allow the battery to recharge.

Battery life and charge time may vary depending on the 
applications, power management settings, and features used.

NOTE

NOTE