Toshiba satellite p200 p205 Manuales De Servicio

[CONFIDENTIAL]  

  

28

 

This section describes how to determine if the computer’s internal optical drive is functioning 
properly. The Satellite P200/Satellite P205/Satellite Pro P200/EQUIUM P200/SATEGO 
P200 module bays can accommodate the following optical drives: 

DVD SuperMulti supporting +-R Double Rayer 
COMBO device  

Figure 2-11 outlines the process. Perform the steps below starting with Procedure 1 and 
continue with the other procedures as required. 

 

Procedure 1:  Audio CD test 

Procedure 2:  Drive cleaning check 

Procedure 3:  Software check 

Procedure 4:  Diagnostic test 

Procedure 5:  Connection and replacement check 

First, insert an audio CD into the CD/DVD drive. If it works, the problem is not with the 
drive. Go to Procedure 3. If the audio CD does not work, go to Procedure 2. If the CD/DVD 
LED on the front panel does not light when the disc is played and the drive gives no response, 
go straight to Procedure 3. 

Insert a CD/DVD drive-cleaning disk into the drive clean according to the drive-cleaning 
product instructions. If the problem persists, go to Procedure 3. 

Ensure that the appropriate driver has been installed on the computer for the CD/DVD drive. 

The audio test program stored in the Diagnostics Disk will test the drive’s ability to play an 
audio CD. See Chapter 3 for details. 

If any errors occur while executing the diagnostic program, go to Procedure 5.