Toshiba satellite pro 4200 notebook Manual De Usuario
User's Manual
Setup and Password Security 7-13
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Built-in Modem
This option allows you to set the COM level for the built-in modem port.
If a built-in modem (not available in some markets) is not installed, this
selection is not active.
selection is not active.
The built-in modem port interrupt request level (IRQ) and I/O port base
address for each COM level is shown below.
address for each COM level is shown below.
COM level
I/O address
Interrupt level
COM1
3F8H
4
(Default)
COM2
2F8H
3
COM3
3E8H
4
COM4
2E8H
3
Not used
(Disables port)
If the setting for the built-in modem port is the same as that for the Serial
or Parallel port, the port(s) is set to Not Used or disabled.
or Parallel port, the port(s) is set to Not Used or disabled.
Parallel
Use the Windows 95/98 Device Manager to change these settings. Refer
to your Windows 95/98 documentation. The Parallel Port field lets you set
the I/O address for the parallel port and the Parallel Port Mode.
to your Windows 95/98 documentation. The Parallel Port field lets you set
the I/O address for the parallel port and the Parallel Port Mode.
When the Parallel Port Mode (see settings below) is set to Standard Bi-
directional, the options are:
directional, the options are:
LPT setting
I/O address
Interrupt level
LPT 1
378H
7
LPT 2
278H
5
LPT 3
3BCH
7
Not Used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
plug-and-play operating systems)