Toshiba satellite pro 4200 notebook Manual De Usuario
User's Manual
Setup and Password Security 7-3
Version
1
Last Saved on 27/01/00 18:20
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as IM_420UK
Changing values in the TSETUP menu
1.
Press
← and → to move between the two columns. Press ↑ and ↓ to
move between items in a column.
2.
Press either the space bar or BkSp to change the value.
3.
Press PgUp or PgDn to change pages.
On either page, you can go directly to a specific group by pressing the first
letter (highlighted) of the group’s name. For example, press B to go to the
Battery
letter (highlighted) of the group’s name. For example, press B to go to the
Battery
group.
Accepting changes and exiting SYSTEM SETUP
1.
Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following
message is displayed:
message is displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following
message is displayed:
message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to
reboot.
2.
To make other changes, press N. Repeat the steps above.
3.
To accept the changes, press Y.
You can press Esc to quit at any time without saving changes. TSETUP
asks you to confirm that you don’t want to save your changes.
asks you to confirm that you don’t want to save your changes.
Default configuration
When you access TSETUP, the current configuration is displayed.
1.
To show the default configuration, press Home.
2.
To accept the default settings, press End and then press Y.
When you execute the default setting, the following settings are not changed:
• Hard Disk Mode
• Hard Disk Mode
• Password
• Write Policy