Toshiba satellite m45 Manual De Usuario

42

5.375 x 8.375 ver 3.1

Be careful not to touch the drive’s lens (located underneath the 
drive’s spindle) or the area around it. Doing so could cause the drive 
to malfunction.

Make sure the disc is completely on the spindle and is 
lying flat on the tray.

Make sure the disc is properly positioned on the spindle. If you 
position the disc incorrectly, it can jam the disc tray.

Push the disc tray in by pressing gently on the center of 
the tray until it clicks into place.

You are ready to use the disc.

Never press the eject button while the computer is accessing the 
drive. Wait for the disk/disc activity light on the system indicator 
panel to turn off before opening the disc tray.

Locate and press the eject button on the drive.

The disc tray partially opens.

Grasp the sides of the tray and pull it fully open.

Remove the disc from the disc tray and place it in its 
protective cover.

If the disc is spinning when you open the disc tray, wait for the disc 
to stop before removing it.

Close the disc tray by pressing gently on the center of the 
tray until it clicks, indicating that it is locked.

Insert a slender object, such as a straightened paper clip, 
into the manual eject hole. 

Never use a pencil to press the manual eject button. Pencil lead can 
break off inside the computer and damage it.

Pull the tray fully open, remove the disc and place it in its 
protective cover.