Toshiba satellite m45 Manual De Usuario

53

5.375 x 8.375 ver 3.1

If you are using the built-in screen, make sure the display 
priority is not set for an external monitor. To do this, press 

Fn

 

and 

F5

 simultaneously (once). If this does not correct the 

problem, press 

Fn

 and 

F5

 simultaneously again to return the 

display priority to its previous setting.

HINT: Holding the Fn key and pressing the F5 key several times will 
advance you through the display options.

If you are using an external monitor:

❖

Check that the monitor is turned on.

❖

Check that the monitor’s power cord is firmly plugged 
into a working power outlet.

❖

Check that the cable connecting the external monitor to 
the computer is firmly attached.

❖

Try adjusting the contrast and brightness controls on the 
external monitor.

❖

Press 

Fn

 and 

F5

 simultaneously to make sure the display 

priority is not set for the built-in screen.

Small bright dots may appear on your screen display when 
you turn on your PC. Your display contains an extremely 
large number of thin-film transistors (TFT) and is 
manufactured using high-precision technology. Any small 
bright dots that may appear on your display are an intrinsic 
characteristic of the TFT manufacturing technology. Over a 
period of time, and depending on the usage of the computer, 
the brightness of the screen will deteriorate. This is also an 
intrinsic characteristic of the screen technology. When the 
computer is operated on battery power, the screen will dim 
and you may not be able to increase the brightness of the 
screen while on battery power.

❖

Make sure the card is inserted properly into the slot.

See “Using PC Cards” in the electronic user’s guide for 
information about how to insert PC Cards.