Toshiba scale view v3 Manual De Usuario
Scale View Owner’s Manual
Error Messages
- 15 -
ERROR MESSAGES
Mismatch Data Length
TMCC text file format is incorrect – check Scale Table
file format version against setting in scale (Initial set 9
bit 7: 1 = Version 2.3; 2 = Version 2.8). Refer to Scale
Table settings and Initial Set Information.
SL9000DRV.EXE is not found
This is the TMCC driver (SL9000DRV.EXE). This
error will display when running the Scale View for the
first time. Start Windows Explorer, go to “c:\program
files\scaleview\” and double click on the driver icon. A
new window will open, click on File in new window
and then on Exit. This registers the driver in Windows.
This error occurs with Demo CD and some Windows
versions, like Windows XP.
Terminal Busy
The master scale is in the middle of LON command or
in the middle of reset. If this is not the case, status clear
scale in question.
Invalid Port Number
The COM port selected for the PC in the Scale Table
doesn’t exist. Select another COM port.
Cannot Open Port
The COM port selected in the Scale Table for the PC
is malfunctioning, currently being used by another
program, or another application did not release/close
the COM port after usage. Try re-booting PC, or select
another COM port.
Error Closing Port
The COM port selected in the Scale Table for the PC is
malfunctioning or is currently being used by another
program. Select another COM port.
Select Failed in Command Sequence
The selected scale is not responding - check scales
Initial sets and “Online” status, Scale View Scale Table
configuration, cabling or Level Converter.
Poll Failed in Get Data Sequence
Selected scale stopped communicating. Check cabling,
Level Converter, scales Initial sets, and Scale View
Scale Table configuration.
Poll Failed in Command Sequence
PC stopped communicating with scale. Check cabling,
Level Converter, scales Initial sets, and Scale View
Scale Table configuration.
Expected Ack: Send Command
Check cabling, Level Converter, scales Initial sets, and
Scale View Scale Table configuration. May see this
with USB to RS-232 adapter, which is not supported.
Expected Ack: Send Message
Check cabling, Level Converter, scales Initial set, and
Scale View Scale Table configuration.