Toshiba sd-370e Manual De Usuario

Descargar
Página de 38
Symptom
Cause
Correction
The DVD video
player does not 
start playback. 
Playback does not
follow the course
of the disc’s
program.
Buttons do not
work.
The
The logo and 
playing picture of 
DVD player 
become poor.
The DVD player 
tray does not 
open.
 remote 
control does not
work properly.
• No disc is inserted.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the
guide.
 
• The disc is dirty.
• The parental lock function is set.
• It is in the mode of repeat 
playback, memory
playback, etc.
• Power supply fluctuations or other
abnormalities such as static 
electricity may interrupt correct 
operations.
• The remote control is not pointed 
at the remote sensor of the DVD
 video player.
• The remote control is too far from
 the DVD video player.
• The
• Adjusted sharpness is too small 
or too large.
 
• Tray Lock mode has been enable.
 batteries in the remote 
control are exhausted.
• Insert a disc.
• Insert a playable disc. (Check the disc type and 
colour  system.)
• Place the disc with the playback side down.
• Place the disc correctly inside the guide on the disc 
tray.
• Clean the disc.
• Cancel the parental lock function or change the
 parental lock level.
• These operations may prevent a proper progress of
the contents.
• Press and hold the ON/STANDBY button on the
front panel for more than about 3 seconds. The DVD
video player turns off. Press the button again to turn
it on. If the buttons still do not work, disconnect the
power plug and insert it into the wall outlet again.
• Point the remote control at the remote sensor of the
DVD video player.
• Operate the remote control within about 7 m.
• Replace
• Adjust Brightness or Sharpness to a  certain level.
• Disable the Tray Lock function.
 the batteries with new ones.
Symptoms and correction
36
Others
Before Calling Service Personnel (continued)