Toshiba sg-1801 Manual De Usuario
12
Preparation
CHARGING THE BATTERY PACK
It is important to charge the battery for 12-16 hours continuously
without any interruption before you use the handset for the first
time.
without any interruption before you use the handset for the first
time.
1
Remove the battery cover on the
back of the handset by sliding it
down.
back of the handset by sliding it
down.
2
Plug the battery pack cord into the
connector with the correct polarity.
(black and red wires).
connector with the correct polarity.
(black and red wires).
3
Place the battery pack in the battery
compartment.
compartment.
4
Put the battery cover back by
sliding until it snaps into place.
Make sure not to get the wires of
the battery pack caught in the
cover.
sliding until it snaps into place.
Make sure not to get the wires of
the battery pack caught in the
cover.
5
Place the handset on the base unit.
Be sure the IN USE/CHARGE LED
lights.
If the IN USE/CHARGE LED does
not light, make sure the AC adaptor
is plugged in securely.
Be sure the IN USE/CHARGE LED
lights.
If the IN USE/CHARGE LED does
not light, make sure the AC adaptor
is plugged in securely.
NOTES:
• Use only the supplied battery pack (TRB-1981 power source 800mAh, 3.6VDC)
• The battery pack is not charged properly if the charging contacts are dirty or
• The battery pack is not charged properly if the charging contacts are dirty or
tarnished. Clean the contacts occasionally with a dry cloth.
INSTALLATION
Red
Black
IN USE/
CHARGE
LED
CHARGE
LED
Charging contacts
SG-1801.qxd 4/19/1 9:12 AM Page 12