Toshiba strata ctx dkt3000 Manual De Usuario

If you call an extension and it’s busy or there is no answer, you can light that 
extension’s Message Waiting LED and enable that extension to call you back.

1. Dial an internal extension. You hear busy tone or there’s no answer.

2. Press 

0VJ

 or 

. The Msg LED flashes red on the called telephone. At your 

telephone, the Msg LED lights steady red and the LCD shows the station number 
where you set a Message Waiting light.

3. Press 

6SNU

. Your Msg LED turns Off. The Msg LED on the called telephone 

flashes until the called party presses the flashing 

0VJ

 button - which calls you 

back.

4. To turn Off a Message LED that you have set on another extension, press 

 plus 

the extension number that has the message light set. Then hang up to release your 
telephone.

➤

To turn the Microphone On/Off when the speakerphone is active (Spkr LED is 
On), press 

0LF

.

When the Microphone is On, the Mic LED is On, steady red. When the 
microphone is Off, the Mic LED is Off and you cannot be heard through the 
microphone.

The microphone and its LED are always On when you receive a Voice-first internal 
call and Off when you receive a Ring-first call.

Each station’s microphone can be set in system programming to:

•

switch On/Off with one touch

•

switch Off only while pressed and held

•

either On/Off at the start of handsfree dialing.

➤

To talk back to a Handset Off-hook Call Announce call, press and hold 

0LF

 and 

talk over your telephone handset/headset. The LED and microphone remain Off.