Toshiba strata ctx dkt3000 Manual De Usuario

Selected telephones may have the ability to change System Speed Dial 
numbers. Follow this procedure but specify a System Speed Dial number 
(200~999) instead.

3. Enter the destination digits, then press 

. The LCD shows “SPEED DIAL” + the 

Speed Dial Number + destination + #. You hear Success Tone.

4. Release the telephone. To enter another number, repeat the process, starting with 

Step 1.

The third method of storing station Speed Dial numbers is via your CTX System 
Administrator, who can establish your Station Speed Dial number through 
administrative software and associate a name with it. This name is used by the 
Directory Dialing feature of DKT3014 large display telephones.

Speed Dial Numbers may include 

~

, 

, 

 and Pause. When using the Access Code 

input method (see above) it is also necessary to use 

 to indicate you have finished 

entering the destination number. This creates 14 functions to be input from the 12 
buttons on the dial pad.

Speed Dial Numbers are stored sequentially in memory areas capable of holding 32 
digits. If you exceed 32 digits, the excess are stored in the next higher area and 
consume the next sequential Speed Dial Number. 

You can dial the entire string by entering the original Speed Dial Number and all digits 
will be sent, including those in excess of 32. If that were Speed Dial Number 100, 
Number 101 would no longer be available. You are not prevented from storing a new 
Number 101 but, if you do, Number 100 will be shortened to 32 digits.