Toshiba strata ctx dkt3000 Manual De Usuario
DADM/DSS Console
DSS Console
80
Strata CTX DKT3000/2000-Series Telephone 05/02
Paging
You can make an announcement page to a group of telephone speakers selected in
system programming with
system programming with
$OO&DOO3DJH
on the DSS console.
6'
(if programmed)
on either the DSS console or the DADM can be used for page announcements. See
.
Call Forward Override (DSS Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console’s telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console’s telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
➤
To override call forward with the console’s associated telephone
1. Press
&QI7UQ
or extension button.
2. Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your
station has a typical program setting.
station has a typical program setting.
➤
To override call forward with your DSS Console
➤
Press the station DSS button set for Call Forward.
Night Transfer Button
This button enables a pre-programmed station to place the system into Day, Day2 or
Night Mode. See your System Administrator for information on the settings for Day,
Day2 or Night Mode. Usually, these modes will transfer calls to a designated location
or voice mailbox, depending on programming.
Night Mode. See your System Administrator for information on the settings for Day,
Day2 or Night Mode. Usually, these modes will transfer calls to a designated location
or voice mailbox, depending on programming.
1. Press
1LJKW7UDQVIHU
.
2. Press the desired Mode number:
•
Press
for Day Mode (LED remains off).
•
Press
for Day2 Mode (LED flashes red).
•
Press
for Night Mode (LED is solid red).