Toshiba st-60 Manual De Usuario
2. SPECIFICATION
EO1-12026
2-2
Model
A
B
Item
CPU
AMD K6 266MHz
AMD K6-2 333MHz
BIOS ROM
512KB Flash ROM
RAM
Capacity
8MB as standard on board, Max.72MB (8MB + 64MB DIMM)
Type
EDO 64bits, non-parity, without ECC, non-buffered, 60ns, 3.3V
Socket
168-pin DIMM x 1
Secondary Cache
Pipelined Burst SRAM 512KB
Interface
RS-232C x 3, Parallel x 1, USB x 2, Drawer x 2 (24V type), PS-2 x 2
Customer's Display
Refer to 1.1 APPLICABLE MODEL (page 1-1).
Touch Panel Method
Analog Resistor Film
UPS
Factory option
Hard Disk Drive
2.5 inch IDE interface HDD x 1 (option)
Floppy Disk Drive
External FDD (option)
LAN interface
10BASE-T
PC Card
PCMCIA TYPE II x 1 (option)
MCR
Option
NV-RAM
Option
2.2
ENGINE SPECIFICATIONS
(1) A and B models
(2) C model
2.2 ENGINE SPECIFICATIONS
Model
C
Item
CPU
Celeron 566MHz
BIOS ROM
512KB Flash ROM
RAM
Capacity
64MB as standard on board, Max.320MB (64MB + 256MB DIMM)
Type
SDRAM 64bits, non-parity, without ECC, non-buffered, PC100 or more, 3.3V
CAS latencies 2 and 3 are available.
CAS latencies 2 and 3 are available.
Socket
168-pin DIMM x 1
Secondary Cache
128KB on die
Interface
RS-232C x 3, Parallel x 1, USB x 2, Drawer x 2 (24V type), PS-2 x 2
Customer's Display
Refer to 1.1 APPLICABLE MODEL (page 1-1).
Touch Panel Method
Analog Resistor Film
UPS
Factory option
Hard Disk Drive
2.5 inch IDE interface HDD x 2 (option) (
NOTE)
Floppy Disk Drive
External FDD (option)
LAN interface
10BASE-T/100BASE-TX
PC Card
PCMCIA TYPE II x 1 (option) (
NOTE)
MCR
Option
NV-RAM
Option
NOTE:
The second Hard Disk Drive and the PC Card cannot be used together.