Toshiba tecra 9000 Manuales De Servicio

1. Remove one M2x4 security torx screw securing 
    the mini PCIcover and lift out the cover.

Mini PCI cover

M2.5x4 security torx screw

2. Disconnect the black and white coax from the
    wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the 
    Wireless LAN card out of the connector about 
   45 degree angle.

TM

Black coax cable

White coax cable

Wireless LAN card

Mini-PCI
connector
clips

1. Turn the computer upside down and remove the 
    following screws:
    -2  M2.5x2.8 silver flat head screws 
    -1  M2.5x4 black flat head screw  
    -4  M2.5x8 silver screws 
    -4  M2x12 silver screws
    -6  M2.5x16 silver screws
2. Turn the computer right side up and open the display.  
 

M2x12
silver 
screws

M2.5x8 silver screws

M2.5x16 silver screws

M2.5x4
black flat
head
screw

M2.5x2.8
silver flat
head screws

 
3. Disconnect the speaker cable from PJ127 and the
    membrane switch cable from PJ122 on the top board 
4. Remove the glass tape securing the LCD/FL cable
    and disconnect the cable from the bottom board.
5. Remove two M2.5x8 silver screws and one M2.5x14
    black screw from the keyboard area.
5. Lift out the top cover assembly.  

    

Membrane switch cable

LCD/FL cable

Glass tape

PJ127

Speaker
cable

Note: When installing the top cover, ensure that the bluetooth
          coaxial cable is properly routed to the Bluetooth slot.

M2.5x8 silver screws

PJ122

M2.5x14 black screw

Download service manual and resetter printer at http://printer1.blogspot.com