Toshiba V.90 Manual De Usuario
Using the Internal Modem
Connection procedures
6
❖
If a (working) telephone connected to the wall jack has an
REN (Ringer Equivalency Number) printed on its label, then
it is an analog phone. If the phone is working correctly, then
the wall jack itself is analog.
REN (Ringer Equivalency Number) printed on its label, then
it is an analog phone. If the phone is working correctly, then
the wall jack itself is analog.
❖
Telephones in an office environment are commonly
connected to digital phone lines.
connected to digital phone lines.
❖
Unfortunately, the wall jacks for both analog and digital
phone lines use the familiar RJ11 connector as shown below.
If you are not sure that an RJ11 jack terminates an analog
phone line, do not connect the modem to it.
phone lines use the familiar RJ11 connector as shown below.
If you are not sure that an RJ11 jack terminates an analog
phone line, do not connect the modem to it.
Connecting the internal modem
CAUTION: In the event of a lightning storm, unplug the
modem cable from the telephone jack.
modem cable from the telephone jack.
A standard modular cable is supplied with the internal modem.
Follow the steps below to connect the internal modem to a
telephone jack.
Follow the steps below to connect the internal modem to a
telephone jack.
1
Turn the connector so that the small connecting lever faces
down.
down.
2
Squeeze the lever and plug the connector into the computer’s
modem port.
modem port.
3
Plug the other end of the cable into an RJ11 wall jack.
Connecting the internal modem