Toshiba V.90 Manual De Usuario

20

2 = No answer, busy, etc.

3 = Training failure V.90, 56K or V.34

4 = Protocol failure if required by \N4, for example.

For PCM connection only, a hexidecimal 6-bit pattern of T1 
frames with robbed-bit signaling.

For PCM connection only, the downstream digital loss.

Result Codes:

This command sets speaker volume to low, medium, or high.

Result Codes:

This command turns the speaker on or off.

As described n=0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11

ERROR

Otherwise

L0 Low volume

L1 Low volume (Same as L0)

L2 Medium volume (default)

L3 High volume

OK

n=0,1,2,3

ERROR

Otherwise

M0 The speaker is off.

M1 The speaker is on until the modem detects the carrier 

signal (default).