Toshiba V.90 Manual De Usuario
AT Commands
AT command formats
27
command is only used in V.22 and V.22bis mode. This option is
not used from North America and is for international use only.
not used from North America and is for international use only.
Result Codes:
&Kn Local flow control selection
Result Codes:
&Pn Select Pulse Dial Make/Break Ratio
&G0 Guard tone disabled (default).
&G1 Sets guard tone to 550 Hz.
&G2 Sets guard tone to 1800 Hz.
OK
n=0,1,2
ERROR
Otherwise
&K0 Disables flow control.
&K3 Enables RTS/CTS flow control (default).
&K4 Enables XON/XOFF flow control.
OK
n=0,3,4
ERROR
Otherwise
&P0
Selects 39% - 61% make/break ratio at 10 pulses
per second.
per second.
&P1
Selects 33% - 67% make/break ratio at 10 pulses
per second.
per second.
&P2
Selects 33% - 67% make/break ratio at 20 pulses
per second.
per second.