Toshiba V.90 Manual De Usuario

35

This command is used to set the various parameters described 
below:

Example: +MS=V90C,1,0,0,0,0

This sets the modulation to be V.90 and the speed negotiations 
to use automode. This is the modem default.

Example: +MS=V90C,1,0,0,0,45333

This will limit the maximum receive connect carrier speed to 
45,333 bps in V.90 mode.

This command returns the current +MS sub parameter settings.

This command returns a listing of all supported values for each 
sub parameter. For the current modem driver, the response is the 
following:

<carrier>

A modem connect protocol string, such as 
V.90 or 56K

<automode>

0 Disables automatic modulation negotiation

1 Enables automatic modulation negotiation

<max_rate>

The maximum transmit rate. If set to 0, then 
the max rate will be determined by the 
modulation means selected in the <carrier> 
and <automode> settings.

<max_rx_rate> Sets the fastest receive carrier speed. If set to 

0, then max rate will be determined by the 
modulation means selected in the <carrier> 
and <automode> settings.