Toshiba V.90 Manual De Usuario
S-Registers
S-Register values
41
S2 AT escape character (user-defined)
This register determines the ASCII value used for an escape
sequence. The default is the + character. The escape sequence
allows the modem to exit data mode and enter command mode
when online. Values greater than 127 disable the escape sequence.
sequence. The default is the + character. The escape sequence
allows the modem to exit data mode and enter command mode
when online. Values greater than 127 disable the escape sequence.
S3 Command line termination character (user-defined)
This register determines the ASCII values as the carriage return
character. This character is used to end command lines and result
codes.
character. This character is used to end command lines and result
codes.
S4 Response formatting character (user-defined)
This register determines the ASCII value used as the line feed
character. The modem uses a line feed character in command
mode when it responds to the computer.
character. The modem uses a line feed character in command
mode when it responds to the computer.
S5 Command line editing character (user defined)
This register sets the character recognized as a backspace and
pertains to asynchronous transmission only. The modem will not
pertains to asynchronous transmission only. The modem will not
Range:
0-255
Default:
43
Units:
ASCII
Range:
0-127, ASCII decimal
Default:
13 (carriage return)
Units:
ASCII
Range:
0-127, ASCII decimal
Default:
10 (line feed)
Units:
ASCII