Toshiba W-808 Manual De Usuario

S-VHS allows you to make high quality video recordings with a horizontal resolution of 400 lines
compared with 240 lines of resolution of normal VHS recordings.

Cassette marked with “S-VHS” should be used.

Load a cassette with the safety tab attached.
The “ ” indicator will appear on the VCR display when the S-
VHS tape is loaded.

Press 

TV/VCR so that the “VCR”

indicator appears in the VCR display.

Select a channel to record with
CHANNEL on the VCR, or CH/TRK
or 

number buttons on the remote

control.

If you see “L1” or “L2” in the VCR display, press 

I.SELECT so that the

channel number appears.
• If you record cable channels via the cable box, make the output

channel number of the cable box or “L1” appear, depending on your
connection. (See pages 11 – 13.)

Press 

SP/SLP to select the

recording tape speed.

SP: Suitable for general recording with
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.

Press 

PROG. to display the MENU screen.

Select “SET UP” using 

FF or REW, and press ENTER.

Press 

STOP repeatedly to go to screen 2 of SET UP page to

select “S-VHS REC”, and set to “ON” using 

REW or FF.

“ ” indicator will appear on VCR display when 

“ON”

 is selected.

Press 

REC on the VCR, or

simultaneously press both 

REC on

the remote control.
The S-VHS recording mode will be
automatically selected.

Press 

STOP to stop recording.

Note
If VHS cassette is loaded, the VHS recording mode will be automatically
selected regardless of the “S-VHS REC” setting.

To record from other
connected equipment
In step 

, press 

I.SELECT to

switch the display as follows:
LI:  To record via the LINE IN
1 jacks or the LINE IN 1 S-
VIDEO jack on the rear panel.
L2: To record via the LINE IN
2 jacks or LINE IN 2 S-VIDEO
jack on the front panel.

S-VIDEO jack will be selected
if both LINE IN and S-VIDEO
jacks are connected.