Toshiba W-804 Manual De Usuario

When playback starts, the VCR
automatically adjusts the tracking for clear
pictures and sound (Digital Auto Tracking).
The “DT” indicator blinks during the
adjusting.
If the VCR cannot locate the best possible
tracking point, hold down one of 

CH/TRK to

adjust the tracking manually.
• To resume the digital auto tracking, hold

down both 

CHANNEL on the VCR

simultaneously for about 2 seconds.

Notes
• During the adjusting, the playback picture and

sound may be distorted.

• The digital auto tracking is activated only in the

playback mode.

• To reset the manual tracking point to the center,

press both 

CHANNEL on the VCR

simultaneously for not longer than 1 second.

• The noise on the screen may not be completely

eliminated depending on the tape used,
especially when the tape was recorded on
another VCR.

The noise reduction function of this VCR is based
on a digital signals system utilizing memory. It is
effective in the playback of noisy tapes as well as
S-VIDEO and RF in video signal.

Furthermore the CSE (Color Signal
Enhancement) circuit, which is included in the
system, compensates for color signal weakness
and gives the best possible color. Thanks to this
circuit color distortion is reduced and a sharp
picture is played back.

Press 

DNR repeatedly to select the following:

:

Usually set to “O

n

”.

The “D

n

R O

n

” will appear on the TV

screen and you can view the picture
with less noise.

R OFF:

This function will not work.

Notes
• The DNR playback is available only in the

playback mode.

• Depending on the recorded picture, for example

too vivid or too noisy, you may not notice a
reduction in the noise.

• The noise reduction may not work on pictures

recorded from special equipment such as TV
game machines or computers.

• The picture sharpness can be changed by full

screen OSD setting. (See page 16.)

Load a recorded cassette.

Power is turned on.
If the cassette has no safety tab,
playback starts automatically.

Press 

PLAY/x2 to start playback.

To stop playback, press 

STOP.

Press 

REW or FF in the stop mode.

This VCR can also play back a tape recorded in S-VHS or S-VHS ET format. This section explains the
basic playback operation.

Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press 

(Continued)