Toshiba W-704 Manual De Usuario

2 0

Adjusting the tracking

When playback starts, the VCR
automatically adjusts the tracking for clear
pictures and sound (Digital Auto Tracking).
The “DT” indicator blinks during the
adjusting.
If the VCR cannot locate the best possible
tracking point, hold down one of 

CH/TRK to

adjust the tracking manually.
• To resume the digital auto tracking, hold

down both 

CHANNEL on the VCR

simultaneously for about 2 seconds.

Notes
• During the adjusting, the playback picture and

sound may be distorted.

• The digital auto tracking is activated only in the

playback mode.

• To reset the manual tracking point to the center,

press both 

CHANNEL on the VCR

simultaneously for not longer than 1 second.

• The noise on the screen may not be completely

eliminated depending on the tape used,
especially when the tape was recorded on
another VCR.

19

µ

 HEAD

You can view high quality pictures while
playing back a tape recorded in the SLP tape
speed.
By pressing 

µ

 repeatedly, the 19

µ

 HEAD

mode is displayed on the TV screen as
follows:

19U-HEAD AUTO: Usually set to “AUTO”. As
the playback starts, the VCR automatically
activates the 19

µ

 head and reproduces high

quality pictures.
19U-HEAD OFF:  Set to “OFF” if the
pictures are marred by dots.

Note
During playback with the 19

µ

 head, momentary

noises or shakes may be produced when you
change the mode to the picture search or
variable speed playback.

Basic Playback

Load a recorded cassette.

Power is turned on.
If the cassette has no safety tab,
playback starts automatically.

Press 

PLAY/x2 to start playback.

To stop playback, press 

STOP.

Rewinding / Fast-forwarding

Press 

REW or FF in the stop mode.

This section explains the basic playback operation.

Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Press 

µ