Toshiba W-704 Manual De Usuario

2 6

Timer Programming Procedure

Example: To record cable channel 25 in the SP tape speed from
9:30 p.m. until 10:00 p.m. on August 30.  Today is August 25.

Load a cassette with the safety tab attached.

Press 

PROG. to display the MENU screen.

Select “PROGRAM” using 

FF or

REW, and press ENTER.

Move to the next using 

FF, and enter

the channel number 25 by using
PLAY/x2, STOP or number
buttons.

• To record a cable program from the connected cable box:

Enter the cable channel number by 

number buttons, PLAY/x2 or

STOP.
If your cable box is not remote-controllable, choose the desired
channel (1 to 125) on the cable box.

• To record a satellite program from the connected DSS

®

 satellite

receiver:
Enter the satellite channel number (100 to 999) by 

buttons, PLAY/x2 or STOP. (If a number 1 to 99 is entered, the
VCR will record a TV/CATV program on the channel, not a
satellite’s.)
If your DSS

®

 satellite receiver is not remote-controllable, choose the

desired channel (100 to 999) on the DSS

®

 satellite receiver.

To make corrections:
Press 

REW to move back to the item, or FF to forward.

The programmable timer allows you to record up to 6 different programs over one month.

Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 16).
• Store the channels on the VCR (pages 17 and 18).
• If you record cable channels, finish the cable box set-up (pages 33 – 36), and turn on the cable box.
• If you record satellite channels, finish the DSS

®

 satellite receiver set-up (pages 37 – 40), and turn on the

DSS

®

 satellite receiver.