Toshiba W-707 Manual De Usuario

Example: To set the clock to 2:30 p.m. on
August 25 (summer time) 2000.

Press 

PROG.

The MENU screen appears on the TV.

Select “PRESET” using 

RIGHT or CURSOR LEFT, and press
ENTER.

Press 

ENTER to select “CLOCK SET”.

Select “AUTO” or “MANU” using
CURSOR UP or CURSOR DOWN.

AUTO:  The VCR automatically sets or
adjusts the clock.
If you select “AUTO” mode, proceed to step 

.

MANU:  You can set the clock manually.
If you select “MANU” mode, select “SUMMER
TIME” using 

CURSOR RIGHT.  Set to “IN” or

“OUT” for the summer (daylight saving) time
using 

CURSOR UP or CURSOR DOWN. (For

“IN” and “OUT” selections, see the
description in step 

.)

Move to the next using 

RIGHT.

(To move back, press 

CURSOR LEFT.)

Vary the digits to set the hour.

CURSOR UP:

To increase.

CURSOR DOWN: To decrease.

Repeat steps 

 and 

 to set the minutes,

month, day, and the year (by the last two
digits).

Proceed to step 

 to start the clock.

Press 

ENTER to start the “AUTO” clock

set feature.

After a while, the VCR automatically updates
the clock using the data broadcast by the
local TV stations.
The following screen will appear on TV
depending on the broadcast at your location.

Select the options using 

RIGHT or CURSOR LEFT. Change the
data using 

CURSOR UP or CURSOR

DOWN.
1) Set “SUMMER TIME (Daylight-

Saving Time)”.

IN, daylight-saving time begins on the first
Sunday in April. Because the clock
automatically changes from 2:00 AM to
3:00 AM (forward one hour), remember
that any part of a scheduled Timer
Recording that falls between these two
times will not be recorded.
OUT, daylight-saving time ends on the last
Sunday in October. The VCR clock
automatically changes from 2:00 AM to
1:00 AM (back one hour). Therefore, it can
affect your recording length if one is set
for this time.

2) Set “Time Zone”.

If you select “AUTO” for your time zone,
the VCR sets the clock using the first
Coordinated Universal Time information it
finds. If the time is not correct, select
another time zone or use the “MANU” option.

3) Set “CH”.

If you don't know the clock data channel,
select “AUTO”. The VCR will scan
automatically to tune the channel carrying
the clock data.

If AUTO CLOCK SET is unsuccessful, set the
time and date through the “MANU” clock set
menu selection.

Press 

PROG.

Now the clock starts.

Press 

PROG to exit.