MiTAC w130 Manuales De Servicio
15
The Integrated AC97 v2.3 compliance Audio Controller that features a
7-channels of audio speaker out and HSP v.90 modem support.
Additionally, the AC97 interface supports 4 separate SDATAIN pins that is
capable of supporting multiple audio code with one separate modem
code.
Additionally, the AC97 interface supports 4 separate SDATAIN pins that is
capable of supporting multiple audio code with one separate modem
code.
The integrated IDE Master/Slave controllers features Dual Independent
IDE channels supporting PIO mode transfers up to 16 Mbytes/sec and
Ultra DMA 33/66/100. It provides two separate data paths for the dual IDE
channels that sustain the high data transfer rate in the multitasking
environment.
Ultra DMA 33/66/100. It provides two separate data paths for the dual IDE
channels that sustain the high data transfer rate in the multitasking
environment.
INTEL 82801DBM ICH4-M supports 6 PCI masters and complies with PCI
2.2 specification. It also incorporates the legacy system I/O like: two
82C37 compatible DMA controllers, Channels 0-3 are hardwired to 8 bit,
three 8254 compatible programmable 16-bit counters channels 5-7,
hardwired keyboard controller and PS2 mouse interface(not use in MiTAC
8080 model), Real Time clock with 512Bytes CMOS SRAM and two
82C59 compatible Interrupt controllers. Besides, the I/O APIC managing
up to 14 interrupts with both Serial and FSB interrupt delivery modes is
supported.
82C37 compatible DMA controllers, Channels 0-3 are hardwired to 8 bit,
three 8254 compatible programmable 16-bit counters channels 5-7,
hardwired keyboard controller and PS2 mouse interface(not use in MiTAC
8080 model), Real Time clock with 512Bytes CMOS SRAM and two
82C59 compatible Interrupt controllers. Besides, the I/O APIC managing
up to 14 interrupts with both Serial and FSB interrupt delivery modes is
supported.
The integrated power management module incorporates the ACPI 1.0b
compliance functions, the APM 1.2 compliance functions, and the PCI bus
power management interface spec. v1.1. Numerous power-up events and
power down events are also supported. 21 general purposed I/O pins are
provided to give an easy to use logic for specific application. In addition,
the INTEL 82801DBM ICH4-M supports Deeper Sleep power state for
Intel Mobile processor.
power management interface spec. v1.1. Numerous power-up events and
power down events are also supported. 21 general purposed I/O pins are
provided to give an easy to use logic for specific application. In addition,
the INTEL 82801DBM ICH4-M supports Deeper Sleep power state for
Intel Mobile processor.
A high bandwidth and mature Intel®’ I/O Hub architecture is incorporated
to connect Montara and Intel 82801DBM ICH4-M Hub interface together.
Intel®’ I/O Hub architecture is developed
Intel®’ I/O Hub architecture is developed
Features
PCI
Bus
Interface
Supports PCI Revision 2.2 Specification at 33 MHz
133 MB/sec maximum throughput
Supports up to six master devices on PCI
One PCI REQ/GNT pair can be given higher arbitration priority (intended
for external 1394 host controller)
Support for 44-bit addressing on PCI using DAC protocol
Integrated
LAN Controller