LG d5966g Manual De Usuario

Your dryer features FlowSense

™

, an innovative 

sensor system that automatically detects 
blockages and restrictions in dryer ductwork. 
Keeping ductwork clean of lint build-up and free 
of restrictions allows clothes to dry faster, reduces 
energy use, and helps prevent fi res.

When the dryer is fi rst installed, the duct condition 
test must be performed. This alerts you to any 
existing problems before the dryer is used. The 
dryer also saves this information to compare and 
measure future changes.

Press and hold the DAMP DRY BEEP and 
TEMP CONTROL buttons at the same time. 
While holding these buttons, press POWER 
ON/OFF.

The dryer will show lnS in the number display 
to indicate that it is in duct condition testing 
mode.

Press START/PAUSE. The dryer will run for 

approximately 2 minutes to test 
for blockages or restrictions to air 
fl ow in the ductwork. 

I N S TA L L AT I O N   I N S T RU C T I O N S

I N S TA L L AT I O N   I N S T RU C T I O N S

If no bars are shown in the display, 
the ductwork is free from blockages or 
restrictions. 

If all bars are lit, the dryer ductwork 
has a blockage that needs to be 
removed immediately. 

Avoid long runs or runs with multiple elbows 
or bends.

Check for blockages and lint buildup.

Make sure the ductwork is not crushed 
or restricted.

20