kymco mo d200 Manuales De Servicio
5
. ENGINE REMOVAL/INSTALLATION
5-2
DINK 200
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• A floor jack or other adjustable support is required to support and maneuver the engine. Be
careful not to damage the motorcycle body, cables and wires during engine removal.
• Use shop towels to protect the motorcycle body during engine removal.
• Drain the coolant before removing the engine.
• After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the
• Drain the coolant before removing the engine.
• After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the
water jacket. Start the engine to check for coolant leaks.
• Before removing the engine, the rear brake caliper must be removed first. Be careful not to bend
or twist the brake fluid tube.
SPECIFICATIONS
Engine dry weight: 30kg
Engine oil capacity: at disassembly: 1.1 liter
Coolant capacity:
Engine dry weight: 30kg
Engine oil capacity: at disassembly: 1.1 liter
Coolant capacity:
Total capacity
: 1165cc
Radiator capacity
: 825cc
Reserve tank capacity : 340cc
TORQUE VALUES
Engine mounting bolt
Engine mounting bolt
5.0kg-m
Rear shock absorber upper mount bolt 4.0kg-m