kymco mo kxr 50 Manuales De Servicio
16
. STARTING SYSTEM
16-7
Mongoose/KXR 90/50
STARTER PINION
(Mongoose/KXR 90)
REMOVAL
Remove the left crankcase cover and drive
Remove the left crankcase cover and drive
pulley face. (Refer to chapter 9)
Remove the starter one-way clutch drive
nut.
Lock nut socket wrench
E015
Remove starter one-way clutch drive.
Start clutch puller
E006
Remove the reduction gear case.
Remove the reduction gear.
INSTALLATION
Install each washer to the top and bottom of
Install each washer to the top and bottom of
the reduction gear.
Apply grease to the reduction gear shaft
forcing part.
Then, install in the reverse order of removal.
STARTER ONE-WAY CLUTCH
DISASSEMBLY
Remove the 32mm lock nut with special
tool.
Take the starter one-way clutch drive gear
off.
Remove the 32mm lock nut with special
tool.
Take the starter one-way clutch drive gear
off.
Lock nut socket wrench
E015
Reduction Gear Case
Starter One-way Clutch Drive Nut
Starter Gear Shaft
Reduction Gear
Washers
Reduction Gear Case
Starter Oneway Clutch Drive Gear
32mm Lock Nut
Special
Special
Special