BMW z4 roadster 2.5i-2003 Manual De Usuario
Replacement procedures
86
tion using the fog lamps, provided traffic
laws in your area do not prohibit this.
laws in your area do not prohibit this.
Because of the extremely high volt-
ages involved, any work on the xenon
ages involved, any work on the xenon
lighting system, including bulb-changing,
should be carried out by technically quali-
fied personnel only. Otherwise, there is a
risk of fatal injury.
should be carried out by technically quali-
fied personnel only. Otherwise, there is a
risk of fatal injury.
<
Front turn signal indicators
21 watt bulb
1.
Insert a screwdriver into the appropri-
ate opening; see arrows
ate opening; see arrows
1
2.
Turn the screwdriver to the left; see
arrows
arrows
2
3.
Use the screwdriver to pull out the
entire bulb holder
entire bulb holder
4.
Replace the bulb; see arrow
5.
Install in the reverse order.
Side turn signal indicators
5 watt bulb
1.
Turn the lamp to the left and remove
2.
Apply gentle pressure to the bulb while
turning it to the left to remove
turning it to the left to remove
3.
Install in the reverse order.
Tail lamps
Tail lamps (
1): 21/4 watt bulbs
Remaining bulbs: 21 watt
1
Tail lamp/brake lamp, red
2
Turn signal indicator, yellow
3
Backup lamp, white
On the right-hand side of the luggage com-
partment:
partment:
Online Edition for Part-No. 01 41 0 156 897 - © 09/02 BMW AG