kymco mo x500 Manuales De Servicio

„ If the fuse is burned out, find the cause and

repair it.    Replace it with a new one
according to the specified capacity.

„ After operation, terminal caps shall be

installed securely.

„ When taking out the connector, the lock on

the connector shall be released before
operation.

„ Hold the connector body when connecting

or disconnecting it.

„ Do not pull the connector wire.

„ Check if any connector terminal is bending,

protruding or loose.

„ The connector shall be inserted

completely.

„ If the double connector has a lock, lock

it at the correct position.

„ Check if there is any loose wire.

„ Before connecting a terminal, check for

damaged terminal cover or loose negative
terminal.

„ Check the double connector cover for

proper coverage and installation.

„ Insert the terminal completely.
„ Check the terminal cover for proper

coverage.

„ Do not make the terminal cover opening

face up.

„ Secure wire harnesses to the frame with

their respective wire bands at the
designated locations.
Tighten the bands so that only the insulated
surfaces contact the wire harnesses.

Confirm
Capacity