Yamaha aw1600 Manual De Usuario
AW1600 Owner’s Manual
Using the EQ library
5
Tr
ac
k recording
k recording
52
The EQ library contains EQ settings appropriate for a variety of instruments. Use these when you
want to apply EQ to an input channel while you record, or when you want to modify the EQ set-
tings after recalling an input library.
want to apply EQ to an input channel while you record, or when you want to modify the EQ set-
tings after recalling an input library.
1
Press and hold the [INPUT SEL] key of the
input channel for which you want to use the
EQ library, to access the INPUT SETTING
popup window.
input channel for which you want to use the
EQ library, to access the INPUT SETTING
popup window.
2
Move the cursor to the EQ button in the
screen, and press the [ENTER] key.
screen, and press the [ENTER] key.
The EQ library will appear.
1 List
This is the library list. The line surrounded by a dotted
line in the middle of the list is the data that is selected
for loading. When you turn the [DATA/JOG] dial, the
data in the list will scroll upward or downward.
line in the middle of the list is the data that is selected
for loading. When you turn the [DATA/JOG] dial, the
data in the list will scroll upward or downward.
B
RECALL button
Move the cursor to this button and press the [ENTER]
key to load the currently selected data.
key to load the currently selected data.
C
EXIT button
Move the cursor to this button and press the [ENTER]
key to close the popup window.
key to close the popup window.
3
Turn the [DATA/JOG] dial to select the
library that you want to use, and press the
[ENTER] key.
library that you want to use, and press the
[ENTER] key.
A popup window will ask you to confirm the library
recall operation.
recall operation.
4
Move the cursor to the OK button and press
the [ENTER] key.
the [ENTER] key.
The selected library will be loaded.
5
Move the cursor to the EXIT button and
press the [ENTER] key.
press the [ENTER] key.
6
If you want to adjust the EQ settings, press
the [HIGH] key, [HI-MID] key, [LO-MID] key,
or [LOW] key of the Selected Channel sec-
tion to select the band, and turn the EQ
knob to adjust the amount of boost/cut.
the [HIGH] key, [HI-MID] key, [LO-MID] key,
or [LOW] key of the Selected Channel sec-
tion to select the band, and turn the EQ
knob to adjust the amount of boost/cut.
Using the EQ library
2
3
3
1
• You can also access the EQ library by pressing the [EQ] knob
of the Selected Channel section. For details, refer to “Using
libraries and scene memories” (
libraries and scene memories” (
HINT
• If turning the EQ knob does not change the tone, check
whether EQ may have been turned off for that channel
(
(
NOTE
• If necessary, you can also adjust the frequency and Q param-
eters of each band. For details, refer to “Using libraries and
scene memories” (
scene memories” (
HINT