Yamaha aw1600 Manual De Usuario
MIDI data format
217
AW1600 Owner’s Manual
Appendix
5.5. MIDI TIME CODE QUARTER FRAME (F1)
< Transmission >
If [MIDI OUT] is set to MTC, Quarter Frame messages will be trans-
mitted according to the time code movements of the recorder when
the recorder is playing or recording.
mitted according to the time code movements of the recorder when
the recorder is playing or recording.
< Reception >
This message is received if [MTC SYNC MODE] is set to SLAVE.
Quarter Frame messages received in realtime are internally assem-
bled into time code that controls the recorder.
Quarter Frame messages received in realtime are internally assem-
bled into time code that controls the recorder.
5.6. SONG POSITION POINTER (F2)
< Transmission >
If [MIDI OUT] is set to CLK, a song position message will be trans-
mitted when STOP or LOCATE is performed on the recorder, to indi-
cate the song position from which the song should start at the next
START or CONTINUE message.
mitted when STOP or LOCATE is performed on the recorder, to indi-
cate the song position from which the song should start at the next
START or CONTINUE message.
5.7. TIMING CLOCK (F8)
< Transmission >
If [MIDI CLK] is ON, this message is transmitted according to the
MIDI Tempo Map from when the recorder begins playing or record-
ing, until it stops.
MIDI Tempo Map from when the recorder begins playing or record-
ing, until it stops.
5.8. START (FA)
< Transmission >
If [MIDI CLK] is ON, this message is transmitted when the recorder
begins playing or recording at a location other than the first measure.
begins playing or recording at a location other than the first measure.
5.9. CONTINUE (FB)
< Transmission >
If [MIDI CLK] is ON, this message is transmitted when the recorder
begins playing or recording at a location other than the first measure.
begins playing or recording at a location other than the first measure.
5.10. STOP (FC)
< Transmission >
If [MIDI CLK] is ON, this message is transmitted when the recorder
stops.
stops.
5.11. ACTIVE SENSING (FE)
< Reception >
Once this message is received, subsequent failure to receive any mes-
sage for a period of 300 ms will cause Running Status to be cleared,
and MIDI communications to be initialized.
sage for a period of 300 ms will cause Running Status to be cleared,
and MIDI communications to be initialized.
5.12. RESET (FF)
< Reception >
When a Reset message is received, MIDI communications will be
initialized by clearing Running Status etc.
initialized by clearing Running Status etc.
5.13. EXCLUSIVE MESSAGE (F0-F7)
5.13.1. MMC
5.13.1.1. MMC STOP
< Transmission >
When the STOP key is pressed, this message is transmitted with a
device number of 7F.
device number of 7F.
< Reception >
If the AW1600 is operating as an MMC Slave, the transport will stop
when this message is received with a matching device number or a
device number of 7F.
when this message is received with a matching device number or a
device number of 7F.
5.13.1.2. MMC PLAY
< Reception >
If the AW1600 is operating as an MMC Slave, the transport will
begin playback when this message is received with a matching
device number or a device number of 7F.
begin playback when this message is received with a matching
device number or a device number of 7F.
5.13.1.3. MMC DEFERRED PLAY
< Transmission >
This message is transmitted with a device number of 7F when the
PLAY key is pressed.
PLAY key is pressed.
< Reception >
If the AW1600 is operating as an MMC Slave, the transport will
begin playback when this message is received with a matching
device number or a device number of 7F.
begin playback when this message is received with a matching
device number or a device number of 7F.
5.13.1.4. MMC FAST FORWARD
< Transmission >
This message is transmitted with a device number of 7F when the FF
key is pressed.
key is pressed.
< Reception >
If the AW1600 is operating as an MMC Slave, the transport will
begin fast-forward when this message is received with a matching
device number or a device number of 7F.
begin fast-forward when this message is received with a matching
device number or a device number of 7F.
STATUS
11110001 F1
Quarter Frame Message
DATA
0nnndddd dd
nnn = message type (0-7) dddd = data
STATUS
11110010 F2
Song Position Pointer
DATA
0ddddddd dd0
data ( H) high 7 bits of 14 bits data
0ddddddd dd1
data ( L) low 7 bits of 14 bits data
STATUS
11111000 F8
Timing Clock
STATUS
11111010 FA
Start
STATUS
11111011 FB
Continue
STATUS
11111100 FC
Stop
STATUS
11111110 FE
Active Sensing
STATUS
11111111 FF
Reset
STATUS
11110000 F0
System Exclusive Message
ID No.
01111111 7F
Real Time System Exclusive
Device ID
0ddddddd dd
Destination (00-7E, 7F:all call)
Command
00000110 06
Machine Control Command (mcc) sub-id
00000001 01
Stop (MCS)
EOX
11110111 F7
End Of Exclusive
STATUS
11110000 F0
System Exclusive Message
ID No.
01111111 7F
Real Time System Exclusive
Device ID
0ddddddd dd
Destination (00-7E, 7F:all call)
Command
00000110 06
Machine Control Command (mcc) sub-id
00000010 02
Play (MCS)
EOX
11110111 F7
End Of Exclusive
STATUS
11110000 F0
System Exclusive Message
ID No.
01111111 7F
Real Time System Exclusive
Device ID
0ddddddd dd
Destination (00-7E, 7F:all call)
Command
00000110 06
Machine Control Command (mcc) sub-id
00000011 03
Deferred play (MCS)
EOX
11110111 F7
End Of Exclusive
STATUS
11110000 F0
System Exclusive Message
ID No.
01111111 7F
Real Time System Exclusive
Device ID
0ddddddd dd
Destination (00-7E, 7F:all call)
Command
00000110 06
Machine Control Command (mcc) sub-id
00000110 04
Fast Forward (MCS)
EOX
11110111 F7
End Of Exclusive