Yamaha cd-r1000 Manual De Usuario
36
Chapter 5—Recording
CDR1000—Owner’s Manual
Inserting a Mute at the End of a Track
The following illustration shows the procedure for inserting a mute at the end of a
track.
track.
1
See page 40 for information on inserting a mute with One-track Sync Recording.
2
While recording, press the [REC MUTE] button.
Rec Mute Standby mode is engaged and the REC MUTE indicator flashes.
3
Press the [PAUSE] button to engage Record Standby mode, or press the
[STOP] button or footswitch to stop recording.
[STOP] button or footswitch to stop recording.
A two-second silent section is inserted and then the REC MUTE indicator goes out. If
the Fade Out function is set, the mute is inserted after the fade out.
the Fade Out function is set, the mute is inserted after the fade out.
2-second
mute
Fade
out
(if set)
Recording
(If the STOP] button or
footswitch was pressed,
recording stops instead)
footswitch was pressed,
recording stops instead)
Record
Standby
mode
PAUSE
Start recording
as normal
Rec Mute
Standby
mode
REC
MUTE