Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Yamaha
  4. crw4416s
  5. Manual De Usuario

Yamaha crw4416s Manual De Usuario

Descargar
Página de 26
 
Chapter 2 - Installing the Yamaha CRW4416S Drive
 
7
 
■
 
Terminator setting
 
The terminator setting indicates whether or not this device is the last 
connected SCSI device.
 
Terminator ON
 
 (with a jumper)
— Use this setting if the CRW4416S is the last device in the internal 
SCSI daisy-chain.
 
Terminator OFF
 
 (without a jumper)
— Use this setting if devices other than the CRW4416S are in the 
internal SCSI daisy-chain and the CRW4416S is not the last device.
 
■
 
Block size setting
 
Block size ON
 
 (with a jumper)
— Block Size is set to 512Byte/sector. This function is valid only for 
workstations, such as those that run UNIX.
 
Block size OFF
 
 (without a jumper)
—
 
Normally, use this setting.
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
Terminator ON (default)
Terminator OFF
* Use jumper connectors to short the locations shown in black.
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
1 2 4
ID SELECT
PARITY
TERMINATOR
BLOCK SIZE
Block size ON
Block size OFF (default)
* Use jumper connectors to short the locations shown in black.