Yamaha mfc10 Manual De Usuario

Normal Mode

TOGGLE ON-OFF/NUMBER OF PGM contains the settings for “on, off, Pn1, Pn2, Pn3, Pn4”. According to the setting, you can use the

foot switch to operate as a toggle on-off, or simultaneously transmit several MIDI data.

TOGGLE ON-OFF settings can be used in Function Memory that are saved with control change data.

• 

...... Press the foot switch and the MAX value (switch on data) is continuously transmitted. Press the foot switch

once again and the MIN value (switch off data) is transmitted. The foot switch’s lamp will flash from the
time the MAX value is transmitted, until the MIN value is transmitted. Even if another foot switch is pressed,
the lamp will remain flashing. (The flashing lamp indicates continuous transmission of the MAX value.)

• 

.... Hold the foot switch and the MAX value (switch on data) is transmitted. Release the foot switch and the

MIN value (switch off data) is transmitted.

Pn1-Pn4 settings can be used in Function Memory that are saved with Note ON/OFF, control change, and program
change data.
Within Function Memories F00-F49, up to 4 of the same type of MIDI data (one of the following— Note On/Off,
Control Change, Program Change) can be simultaneously transmitted.

Pn4 Pn3

Pn2

Pn1

Pn4 Pn3

Pn2

Pn1

Pn4 Pn3

Pn2

Pn1

F00

F01

F49

For example, you can transmit several note on/off data over the same MIDI channel to play chords, or transmit control
change data over several MIDI channels to simultaneously control external effectors. Also, you can simultaneously
change the voices of several devices by transmitting Program Change Data over several MIDI channels.

■

1

Select the memory number to be set.

2

Press [MEMORY EDIT] and select “TOGGLE ON-OFF/
NUMBER OF PGM”.

3

Press [INC/YES] or [DEC/NO] and select “Pn1” (“Pn1” is
automatically selected when the edit operation is entered).

4

Select each parameter (STATUS, DATA/CTRL, etc.) using
[MEMORY EDIT], and set as required using [INC/YES] and
[DEC/NO].

5

After setting all parameters for “Pn1”, repeat steps 

2

 and 

3

 to

select “Pn2”. Repeat step 

4

 to select and set each parameter as

required.

6

In the same manner as “Pn2”, set parameters for “Pn3”, and “Pn4”
if necessary.

MEMORY

EDIT

Pn1

DEC
/NO

INC

/YES

±10

DEC
/NO

INC

/YES

±10

Pn2

MEMORY

EDIT

STATUS
DATA/CTRL

BANK MSB/MAX
BANK LSB/MIN

TOGGLE ON-OFF
/NUMBER OF PGM