Yamaha mfc10 Manual De Usuario

MFC10 Functions

When a foot switch is pressed, MIDI data (program changes/function data) stored in the
MFC10’s internal memory is transmitted to external MIDI devices.

Program change data transmitted from the MFC10 can select
voices, etc., on other MIDI devices.
Bank select data can be transmitted along with program change
data as well.

The MFC10 can transmit the following function data to control
other MIDI devices.

* Values in parentheses are shown in the display.

• NOTE ON/OFF (90-9F)

• CONTROL CHANGE (b0-bF)

• PROGRAM CHANGE (C0-CF)

• SONG SELECT (F3)

• START (FA)

• CONTINUE (Fb)

• STOP (FC)

• SECTION CONTROL (F0)

• TEMPO CONTROL (Ft)

■

Switch

STATUS
DATA/CTRL

BANK MSB/MAX
BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM

DEC
/NO

INC

/YES

MEMORY

EDIT

FC

EDIT

WRITE

/EXIT

±10

STATUS
DATA/CTRL

BANK MSB/MAX
BANK LSB/MIN
TOGGLE ON-OFF
/NUMBER OF PGM

DEC
/NO

INC

/YES

MEMORY

EDIT

FC

EDIT

WRITE

/EXIT

±10

The MFC10’s foot switches can be set to operate in one of two modes (Normal Mode/Mix Mode). Use the

[FUNCTION NORMAL — MIX] switch on the rear panel to set the mode the MFC10 will operate in. (see
page 5, 8, 19)

How the foot switches operate in each mode is further explained below.

[In this mode, Program Change Memory and Function Memory are independent of each other.]

NORMAL — MIX

FUNCTION