Yamaha my16-cii Manual De Usuario

 
Bundle Numbers 

 

Set the appropriate bundle numbers using one of the methods described below to allow transfer 

of audio signals between transmitting and receiving devices. 

 

„

 

This method selects the bundle numbers automatically and is only useful for setting up bundles 

that will be transmitted and received between the MY16-CII cards displayed in the Matrix View. 

 

1.  

Click on the Matrix View to create a connection or “point,” as described below. 

When a connection is created, bundle numbers are set for the transmitting and receiving 

devices, allowing audio signal transfer. “Tx” is the transmit bundle and “Rx” is the receive 

bundle. The numbers following Tx or Rx are the socket numbers that indicate the order of 

the transmit and receive bundles. 

 

When a new connection point is created, unicast bundles (black lines) are specified by default. 

 

Note: Audio signals cannot be transferred if the latencies of the transmitting and receiving 

devices differ. Set the same latency for both devices via the “Yamaha Device Settings” window 

(page 16). 

 

 

 

CobraNet Manager Lite for Yamaha Owner’s Manual 

11