Yamaha R-S700BL Manual De Usuario

This section describes the function of each button on the 
remote control used to control this unit or other 
components made by Yamaha or other manufacturers.

y

 

 indicates buttons that can also be used to control Zone 2. 

For more information about Zone 2, see pages 45 and 46.

■ Common controls

The following buttons can be used no matter which input 
source is selected.

1 Infrared signal transmitter
Sends infrared signals.

2 RECEIVER A 
Turns this unit on, or sets it to standby mode.

3 ID
Changes the remote control ID (see page 44).

4 MAIN/ZONE 2
Switches the zone to be operated by the remote control 
between the Main Zone and Zone 2 (see page 46).

5 SLEEP
Sets the sleep timer (see page 19).

6 Input selector buttons 
Selects the input source and changes the control area (see 
page 47).

7 OPTION
Turns the OPTION menu on and off (see page 40).

8 SPEAKERS A/B
Turns on and off the set of speakers connected to the 
SPEAKERS A and/or SPEAKERS B terminals on the rear 
panel of this unit when the corresponding button is 
pressed.

9 MUTE 
Mutes the sound output. Press again to restore the sound 
output to the previous volume level.

0 VOLUME +/– (

Increases or decreases the sound output level.

This does not affect the output level of the REC jacks.

A RETURN
Returns to the previous menu or ends the menu display 
when using the Option menu (see page 40).

B

B / C / D / E / ENTER

Selects and confirms items in the Option menu (see page 
40).

C CODE SET/RECEIVER
Used to program the remote control so that it can control 
your other external components (see page 49).
After using the remote control to control one of your 
components, this button is used to switch the remote 
control to receiver mode so that remote control commands 
will be sent to this unit (see page 48).