Emerson NGA2000 Manual De Usuario
90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98
NGA 2000
6 - 15
Main Menu — Technical level configuration
↓↓
System set up
↓↓
Security codes
↓↓
In the menu "Record security codes" you can enable a security code for each the "Basic
controls", for the "Expert controls and set up" and for the "Technical level configuration".
Caution: If you enable a security code and forget it, you will not have any possibility
to enter the locked level!
controls", for the "Expert controls and set up" and for the "Technical level configuration".
Caution: If you enable a security code and forget it, you will not have any possibility
to enter the locked level!
How to record and to enable the security codes:
1) Determination of the code number for the:
♦
"Basic controls" (standard: 12345):
•
Go to the line "Record basic level security code..." with the
↑↑
-key or the
↓↓
-key and
change to the corresponding submenu with the ENTER key or the
→
→
-key (see
illustration on the next page).
•
Alternative: Press F2.
♦
"Expert controls and set up" (standard: 12345):
•
Go to the line "Record expert level security code..." with the
↑↑
-key or the
↓↓
-key and
change to the corresponding submenu with the ENTER key or the
→
→
-key (menu
page is analogous to the one of the basic level, see illustration on the next page).
•
Alternative: Press F3.
♦
"Technical level configuration" (standard: 54321):
•
Go to the line "Record technical level security code..." with the
↑↑
-key or the
↓↓
-key
and change to the corresponding submenu with the ENTER key or the
→
→
-key (menu
page is analogous to the one of the basic level, see illustration on the next page).
•
Alternative: Press F4.
HOME
BASIC
EXPERT
TECH.
INFO
CLD
F1
F2
F3
F4
F5
95.0 ppm
Record security codes
Basic level security:
Disabled
Expert level security:
Disabled
Technical level security:
Disabled
Record expert level security code...
Record technical level security code...
Record technical level security code...
Record basic level security code...
6.1.6 System set up
Security Codes