Eizo eizo flexscan s2001w Manual De Usuario

Chapter 5  Reference

The stand can be removed and replaced with an arm (or another stand) to be 
attached to the monitor. Use an arm or stand of EIZO option.

Unscrew the four screws securing the unit and the stand with the 
screwdriver.

Secure the monitor to the arm or stand using the screws specified in the 
user’s manual of the arm or stand.

•  When attaching an arm or stand, 

follow the instructions of their user’s 
manual.

•  When using another manufacturer’

s arm or stand, confirm the following 
in advance and select one conforming 
to the VESA standard. Use the M4 
× 12 mm screws supplied with this 
monitor.
– Clearance between the screw holes: 

100 mm × 100 mm

– Thickness of plate: 2.6 mm
– Strong enough to support weight of 

the monitor unit (except the stand) 
and attachments such as cables.

•  When using an arm or stand, attach it 

to meet the following tilt angles of the 
monitor.
– Height adjustable stand: 

Up 40 degrees, down 0 degrees 
(vertical display, 90 degrees 
clockwise)

– EZ-UP stand: 

Up 25 degrees, down 0 degrees 
(vertical display, 90 degrees 
clockwise)

•  Connect the cables after attaching an 

arm.

•  If you need to remove the EZ-UP 

stand, turn the panel on the monitor 
to the left and right a little to appear 
the four screws positioned under the 
stand. Then unscrew the four screws.