Echo shred'n'vac es-210 Manual De Usuario

Never remove vacuum tube or open fan guard when SHRED ‘N’
VAC

®

 is running or serious personal injury may result. Always

wear heavy-duty work gloves when working in shredder blade area.

1.

With engine stopped, remove spark plug wire, loosen clamp and
pull vacuum tube from unit.

2.

Remove accumulated debris from blade and inspect for damage.

IMPORTANT
Do not operate SHRED ‘N’ VAC

®

 if shredder blade is damaged or

broken. Return unit to Echo Dealer for service.

3.

Install vacuum tube. Refer to “Installing Vacuum Tube” (page 9)
in assembly section for correct assembly procedures.

Parts Required: None

Shake dust from bag and inspect for hole or tears.  Inspect zipper and
clean debris from teeth to assure complete closing of zipper.

IMPORTANT
The cylinder exhaust port must be inspected and cleaned of excess
carbon every 3 months or 90 hours of operation in order to maintain
this engine within the emissions durability period. ECHO strongly
recommends that you return your unit to your ECHO dealer for this
important maintenance service.