Adam Equipment gbc-gfc series Manual De Usuario
P a g e
14
© Adam Equipment Company 2011
6.3.4 Manually Accumulated Totals
•
The values (weight and count) shown on the display can be added to
the values in the memory by pressing the [M+] key. The "Weight"
display will show the total weight, the "Count" display will show the
total accumulated count and the "Unit Weight" display shows the
number of times, the items have been added to the memory for
accumulation. The values will be displayed for 2 seconds before
returning to normal. If the accumulated number exceeds 6 digits the
display will show “diSPEr”, the count is still being stored correctly and
the RS232 printout will still show the correct values.
the values in the memory by pressing the [M+] key. The "Weight"
display will show the total weight, the "Count" display will show the
total accumulated count and the "Unit Weight" display shows the
number of times, the items have been added to the memory for
accumulation. The values will be displayed for 2 seconds before
returning to normal. If the accumulated number exceeds 6 digits the
display will show “diSPEr”, the count is still being stored correctly and
the RS232 printout will still show the correct values.
•
The “Mem” symbol will be on when there are values stored in the
accumulation memory.
accumulation memory.
•
The scale must return to zero or a negative number, before another
sample can be added to the memory.
sample can be added to the memory.
•
More products can then be added and the [M+] key to be pressed
again. This can continue for up to 99 entries or until the capacity of the
“Weight” display is exceeded. When the weight exceeds 6 digits the
display will show “diSPEr”.
again. This can continue for up to 99 entries or until the capacity of the
“Weight” display is exceeded. When the weight exceeds 6 digits the
display will show “diSPEr”.
•
To observe the total stored value, press the [MR] key. The total will be
displayed for 2 seconds.
displayed for 2 seconds.
•
To clear the memory- first press [MR] to recall the totals from memory
and then press the [CE] key to clear all values from the memory.
and then press the [CE] key to clear all values from the memory.
6.3.6 Automatic Accumulated Totals
•
The scale can be set to automatically accumulate totals when a weight
is placed on the scale. This eliminates the need to press the [M+] key to
store values into the memory. However the [M+] key is still active and
can be pressed to store the values immediately. In this case the values
will not be stored when the scale returns to zero.
is placed on the scale. This eliminates the need to press the [M+] key to
store values into the memory. However the [M+] key is still active and
can be pressed to store the values immediately. In this case the values
will not be stored when the scale returns to zero.
•
See the Section 9.0 on RS-232 Interface for details on how to enable
Automatic Accumulation.
Automatic Accumulation.