Garmin GPSMAP 76S Manual De Usuario
24
Active Route/Goto Page
The Active Route/Goto Page will show the waypoint(s) that are currently
being used for navigation. If you are navigating using a ‘Go To’, then the active
waypoint will be displayed with the distance remaining displayed on the right
side of the display. If you are navigating a route, the list of route waypoints is
displayed with the distance of each leg displayed on the right side of the display.
Pressing the ROCKER to the right or left will cycle the data fi eld on the right side
of the display though a variety of data. Pressing MENU will display the options
that are available for current navigation.
waypoint will be displayed with the distance remaining displayed on the right
side of the display. If you are navigating a route, the list of route waypoints is
displayed with the distance of each leg displayed on the right side of the display.
Pressing the ROCKER to the right or left will cycle the data fi eld on the right side
of the display though a variety of data. Pressing MENU will display the options
that are available for current navigation.
Plot Page
The Plot Page is used to view data provided by the Altimeter. The unit can be
set to plot Pressure or Elevation changes. Either Barometric Pressure or Ambient
Pressure can be plotted over time. Elevation changes can be plotted over time or
distance. The Elevation Plot data is contained in the track tog. If you clear the
track log the current elevation plot will also be cleared. Clearing the track log
will not clear a current Pressure Plot.
Pressure can be plotted over time. Elevation changes can be plotted over time or
distance. The Elevation Plot data is contained in the track tog. If you clear the
track log the current elevation plot will also be cleared. Clearing the track log
will not clear a current Pressure Plot.
The Plot Page has confi gurable data fi elds at the top. A data fi eld at the
bottom of the page will show current information that relates to the type of data
shown on the plot.
shown on the plot.
Pressing the ROCKER Up or Down will change the vertical scale of the plot.
Pressing the ROCKER key Up, increases the vertical scale showing less vertical
detail on the plot. Pressing the ROCKER key Down decreases the vertical scale,
showing more vertical detail.
detail on the plot. Pressing the ROCKER key Down decreases the vertical scale,
showing more vertical detail.
Pressing the ‘Zoom’ IN or OUT key will change the horizontal scale, and
allows you to view a larger area of the plot in less detail, or a smaller area in
greater detail. Zooming OUT increases the horizontal scale, showing more data,
Zooming IN decreases the vertical scale, showing less data. When zooming
OUT, the vertical scale will be increased if needed to accommodate all of the
vertical detail of the data.
greater detail. Zooming OUT increases the horizontal scale, showing more data,
Zooming IN decreases the vertical scale, showing less data. When zooming
OUT, the vertical scale will be increased if needed to accommodate all of the
vertical detail of the data.
Active Route — Plot Page
Reference
Active Route Page
Plot Page
190-00249-00_0C.indd 24
5/7/2003, 9:54:43 AM