Sagem f@st 1500 Manual De Usuario

SAGEM F@st™ 1500 Reference Manual - 288053220-03
Page 4-18

Reproduction and communication prohibited without the written permission of

Use the LAN menu to configure the LAN IP address and to enable the DHCP server for
dynamic client address allocation.

IP Address The IP address of the SAGEM F@st™ 1500 ADSL Router.

IP Subnet Mask The subnet mask of the network.

DHCP Server The SAGEM F@st™ 1500 ADSL Router comes with the DHCP function. To

dynamically assign an IP address to client PCs, enable this function.

Lease Time Set the IP lease time. For home networks this may be set to Forever, which means

there is no time limit on the IP address lease.

Start IP Specify the start IP address of the DHCP pool. Do not include the gateway

address of the SAGEM F@st™ 1500 ADSL Router in the client address pool. If
you change the pool range, make sure the first three octets match the gateway’s
IP address, i.e., 192.168.2.xxx

End IP Specify the end IP address of the DHCP pool.

Domain Name If your network uses a domain name, enter it here. Otherwise, leave this field

blank.

Remember to configure your client PCs for dynamic address allocation
(See section 3.1 for details).

In this menu is included the following sub-menu:

¾

  DNS (see section 4.5.1).